Modeling, Analysis and Design Courses - Spain & Portugal

26-Sep-2016

CONCRETE AND STEEL STRUCTURES- Modeling, Analysis and Design Course for Professionals

SAP2000 Concrete and Steel Structures Educational Event

Module 1: Introduction to SAP2000

Finite Element Method
Components of the Structural Model
Graphical User Interface
Loads, Analysis and Combinations
Constraints and Joint Patterns
Results

Module 2: Modeling and Design a Concrete Building

Create a model from scratch
Modeling Options
Vertical and Lateral Loadings
Soil Pressure
Response Spectrum Analysis
P-Delta effect
Load Combinations
Design according to the Eurocodes 2 & 8

Module 3: Modeling a Post-Tensioned Beam

Drawing Tendons
Edit Tendon Profile
Tendons Modeled as Loads or Elements
Tendon Load and Short Term Losses
Calculate Long Term Losses
Calculate the Hyperstatic (Secondary) Forces
Serviceability Stress Checks

Module 4: Moving Load

Load Paths and Vehicles
Influence Lines
Influence-Based Analysis
Step-by-Step Analysis

Module 5: Section Designer

Define an irregular Reinforced Concrete Section
Section Properties
Interaction Surface
Moment-Curvature Curve
Tendons Modeled as Loads or Elements

Module 6: Steel Truss Design

Creation of Auto Selection Sections
Analysis Section vs Design Section
Iterative Design
Set Displacement Targets

FUNCHAL, PORTUGAL

Oct. 3-6, 2016

6:00pm - 10:00pm

€150 UMA Students

€180 Students, OE Members & Unemployed

€350 Professionals

MADEIRA UNIVERSITY
Campus Universitário da Penteada
9020-105 Funchal, Madeira

REGISTER NOW

CPD 20 hours certificate, CSI Training Certificate and online digital training manual.
Requirements:
Attendees should bring their personal laptops.
For additional information and booking please contact:
CSI Portugal
Email: formacao@csiportugal.com

CONCRETE AND STEEL STRUCTURES- Modeling, Analysis and Design Course for Professionals

SAP2000 Concrete and Steel Structures Educational Event

Module 1: Introduction to SAP2000

Finite Element Method
Components of the Structural Model
Graphical User Interface
Loads, Analysis and Combinations
Constraints and Joint Patterns
Results

Module 2: Modeling and Design a Concrete Building

Create a model from scratch
Modeling Options
Vertical and Lateral Loadings
Soil Pressure
Response Spectrum Analysis
P-Delta effect
Load Combinations
Design according to the Eurocodes 2 & 8

Module 3: Modeling a Post-Tensioned Beam

Drawing Tendons
Edit Tendon Profile
Tendons Modeled as Loads or Elements
Tendon Load and Short Term Losses
Calculate Long Term Losses
Calculate the Hyperstatic (Secondary) Forces
Serviceability Stress Checks

Module 4: Moving Load

Load Paths and Vehicles
Influence Lines
Influence-Based Analysis
Step-by-Step Analysis

Module 5: Section Designer

Define an irregular Reinforced Concrete Section
Section Properties
Interaction Surface
Moment-Curvature Curve
Tendons Modeled as Loads or Elements

Module 6: Steel Truss Design

Creation of Auto Selection Sections
Analysis Section vs Design Section
Iterative Design
Set Displacement Targets

MADRID, SPAIN

Oct. 24-28, 2016

4:00pm - 8:00pm

€170 Students & Unemployed

€360 OE Members

€400 Professionals

LAGASCA BUSINESS CENTER
C/ Lagasca, Nº 95
28006 Madrid, Spain

REGISTER NOW

CPD 20 hours certificate, CSI Training Certificate and online digital training manual.
Requirements:
Attendees should bring their personal laptops.
For additional information and booking please contact:
CSI Spain
Email: formacion@csiespana.com

CONCRETE AND STEEL STRUCTURES- Modeling, Analysis and Design Course for Professionals

SAP2000 Concrete and Steel Structures Educational Event

Module 1: Introduction to SAP2000

Finite Element Method
Components of the Structural Model
Graphical User Interface
Loads, Analysis and Combinations
Constraints and Joint Patterns
Results

Module 2: Modeling and Design a Concrete Building

Create a model from scratch
Modeling Options
Vertical and Lateral Loadings
Soil Pressure
Response Spectrum Analysis
P-Delta effect
Load Combinations
Design according to the Eurocodes 2 & 8

Module 3: Modeling a Post-Tensioned Beam

Drawing Tendons
Edit Tendon Profile
Tendons Modeled as Loads or Elements
Tendon Load and Short Term Losses
Calculate Long Term Losses
Calculate the Hyperstatic (Secondary) Forces
Serviceability Stress Checks

Module 4: Moving Load

Load Paths and Vehicles
Influence Lines
Influence-Based Analysis
Step-by-Step Analysis

Module 5: Section Designer

Define an irregular Reinforced Concrete Section
Section Properties
Interaction Surface
Moment-Curvature Curve
Tendons Modeled as Loads or Elements

Module 6: Steel Truss Design

Creation of Auto Selection Sections
Analysis Section vs Design Section
Iterative Design
Set Displacement Targets

MÁLAGA, SPAIN

Nov. 7-11, 2016

9:30am - 1:30pm

€170 Students, Members & Unemployed

€250 External Members

€400 Professionals

COLEGIO OFICIAL DE INGENIEROS INDUSTRIALES DE ANDALUCIA ORIENTAL
Avda. De Andalucía, 30
29007 Málaga, Spain

REGISTER NOW

CPD 20 hours certificate, CSI Training Certificate and online digital training manual.
Requirements:
Attendees should bring their personal laptops.
For additional information and booking please contact:
CSI Spain
Email: formacion@csiespana.com

Advanced Modeling Techniques - Advanced Training Course for Structural Analysis

SAP2000 Educational Event

Module 1: Advanced Modeling with SAP2000

Orthotropic and Layered Sections
Constraints
Modeling of Imperfections
Section Cuts
Generalized Displacements
Joint Patterns
Stress-Strain Curves
Joint Offsets
Joint Connectivity
Introduction to Nonlinear Analysis

Module 2: Geometric Nonlinearity

P-Delta Effect
Large Displacements
Initial P-Delta Analysis
Linear Buckling Analysis
Nonlinear Buckling Analysis
Snap-Through Buckling
Nonlinear Behavior of Cables Stayed Structures
Quasi-Static Time History Analysis

Module 3: Material Nonlinearity

Plastic Hinges
Static Pushover Analysis
Link Objects
Nonlinear Shell Elements
Cracked Behavior in Frame Elements

Module 4: Advanced Procedures and Modeling techniques

Load Optimizer
Staged Construction
Footfall Analysis
Steady-State Analysis
Cables over Pulley Systems

Module 5: Modal Analysis - Advanced Topics

Eigenvector Analysis
Ritz-Vector Analysis
Modal Analysis Output

Module 6: Seismic Analysis

Lateral force method of analysis
Modal response spectrum analysis
Nonlinear static (pushover) analysis
Nonlinear time-history analysis

FUNCHAL, PORTUGAL

Nov. 14-19, 2016

Nov 14-18 6:00pm - 10:00pm
Nov 19 9:00am - 1:00pm

€240 Students & Unemployed

€350 OE Members

€420 Professionals

ORDEM DOS ENGENHEIROS DA MADEIRA
Rua Conde Carvalhal, 23
9060-011 Funchal, Madeira

REGISTER NOW

CPD 24 hours certificate, CSI Training Certificate and online digital training manual.
Requirements:
Attendees should bring their personal laptops.
For additional information and booking please contact:
CSI Portugal
Email: formacao@csiportugal.com

CSI BIM TECHNOLOGIES with CSiXRevit, SAP2000, ETABS & SAFE

Interoperability and BIM Technologies for Structrual Analysis and Modeling

Module 1: Introduction to SAP2000, ETABS, SAFE & CSiXRevit

Module 2: Modeling tools and Examples. Industrial Structures

Module 3: CSI Software modeling options for practical structural problems and situations

Module 4: Loads, analysis and combinations

Module 5: Analysis and Results

Module 6: Design and structural check

Module 7: Interoperability with AutoCAD & Revit

Module 8: Report Generation

MÁLAGA, SPAIN

Nov. 21-25, 2016

9:30am - 1:30pm

€170 Students, Members & Unemployed

€250 External Members

€400 Professionals

COLEGIO OFICIAL DE INGENIEROS INDUSTRIALES DE ANDALUCIA ORIENTAL
Avda. De Andalucía, 30
29007 Málaga, Spain

REGISTER NOW

CPD 20 hours certificate, CSI Training Certificate and online digital training manual.
Requirements:
Attendees should bring their personal laptops.
For additional information and booking please contact:
CSI Spain
Email: formacion@csiespana.com

CSI BIM TECHNOLOGIES with CSiXRevit, SAP2000, ETABS & SAFE

Interoperability and BIM Technologies for Structrual Analysis and Modeling

Module 1: Introduction to SAP2000, ETABS, SAFE & CSiXRevit

Module 2: Modeling tools and Examples. Industrial Structures

Module 3: CSI Software modeling options for practical structural problems and situations

Module 4: Loads, analysis and combinations

Module 5: Analysis and Results

Module 6: Design and structural check

Module 7: Interoperability with AutoCAD & Revit

Module 8: Report Generation

BARCELONA, SPAIN

Dec. 13-16, 2016

3:30pm - 8:30pm

€180 Students & Unemployed

€350 OE Members

€450 Professionals

COLEGIO DE INGENIEROS DE CAMINOS, CANALES Y PUERTOS DE CATALUÑA
Els Vergos, 16
08017 Barcelona, Spain

REGISTER NOW

CPD 20 hours certificate, CSI Training Certificate and online digital training manual.
Requirements:
Attendees should bring their personal laptops.
For additional information and booking please contact:
CSI Spain
Email: formacion@csiespana.com

Videos

Want to see CSiCol in your own workflow?